CargoScreenCargoScreen

HS code directory

Each page maps the EU sanctions and export-control measures attached to a single HS / TARIC code — direction, regime, annex, source regulation, and plain-language explanation per measure. Snapshots are refreshed from EU TARIC and consolidated EUR-Lex texts.

1,081 codes · page 3 of 11

  • HS 4810220020

    With a weight of 70 g/m² or more but not exceeding 400 g/m² and brightness of more than 84 (measured according to ISO 2470-1), excluding multi-ply paper, multi-ply paperboard, kraft paper, kraft paperboard and rolls suitable for use in web-fed presses

  • HS 4810293020

    With a weight of 70 g/m² or more but not exceeding 400 g/m² and brightness of more than 84 (measured according to ISO 2470-1), excluding multi-ply paper, multi-ply paperboard, kraft paper, kraft paperboard and rolls suitable for use in web-fed presses

  • HS 4810298020

    With a weight of 70 g/m² or more but not more than 400 g/m² and brightness of more than 84 (measured according to ISO 2470-1), excluding multi-ply paper, multi-ply paperboard, kraft paper and kraft paperboard

  • HS 4810991020

    With a weight of 70 g/m² or more but not more than 400 g/m² and brightness of more than 84 (measured according to ISO 2470-1), excluding rolls suitable for use in web-fed presses

  • HS 4810998020

    With a weight of 70 g/m² or more but not more than 400 g/m² and brightness of more than 84 (measured according to ISO 2470-1), excluding rolls suitable for use in web-fed presses

  • HS 4811590020

    Heavyweight thermal paper weighing more than 65 gr/m²; in rolls of a width of 20 cm or more, a weight of the roll (including the paper) of 50 kg or more and a diameter of the roll (including the paper) of 40 cm or more (‘jumbo rolls’); with or without a base coat on one or both sides; coated with a thermosensitive substance on one or both sides; and with or without a top coat

  • HS 4811600010

    Decor paper with the following characteristics - weighing 30-150 g/m²; having an ash content between 5% and 50%; - having a Klemm absorbency of at least 12 millimetres per 10 minutes or a resin pick-up of 20% to 200%; - having a wet tensile strength of 6 to 12 Newton (N) per 15 millimetres; - having a Gurley porosity of 3 to 80 seconds per 100 millilitres; - having a smoothness of 20 to 300 according to the Bekk method; - in reels with a width up to 300 centimetres; - whether or not pre-impregnated with a combination of latices or natural binders (like starch); - excluding wallpaper and similar wallcoverings; - excluding papers saturated with water-based melamine, urea, phenol or any thermosetting, thermoplastic resin solutions (‘the product under investigation’).

  • HS 4811900010

    Lightweight thermal paper weighing 65 gr/m² or less; in rolls of a width of 20 cm or more, a weight of the roll (including the paper) of 50 kg or more and a diameter of the roll (including the paper) of 40 cm or more (‘jumbo rolls’); with or without a base coat on one or both sides; coated with a thermosensitive substance on one or both sides; and with or without a top coat

  • HS 4811900020

    Heavyweight thermal paper weighing more than 65 gr/m²; in rolls of a width of 20 cm or more, a weight of the roll (including the paper) of 50 kg or more and a diameter of the roll (including the paper) of 40 cm or more (‘jumbo rolls’); with or without a base coat on one or both sides; coated with a thermosensitive substance on one or both sides; and with or without a top coat

  • HS 4816900010

    Lightweight thermal paper weighing 65 gr/m² or less; in rolls of a width of 20 cm or more, a weight of the roll (including the paper) of 50 kg or more and a diameter of the roll (including the paper) of 40 cm or more (‘jumbo rolls’); with or without a base coat on one or both sides; coated with a thermosensitive substance on one or both sides; and with or without a top coat

  • HS 4823908520

    Lightweight thermal paper weighing 65 gr/m² or less; in rolls of a width of 20 cm or more, a weight of the roll (including the paper) of 50 kg or more and a diameter of the roll (including the paper) of 40 cm or more (‘jumbo rolls’); with or without a base coat on one or both sides; coated with a thermosensitive substance on one or both sides; and with or without a top coat

  • HS 5402310000

    Of nylon or other polyamides, measuring per single yarn not more than 50 tex

  • HS 5402450000

    Other, of nylon or other polyamides

  • HS 5402510000

    Of nylon or other polyamides

  • HS 5402610000

    Of nylon or other polyamides

  • HS 5603139070

    Non-woven needle-punched sheets of polyester filaments, of a thickness exceeding 0.5 mm but not exceeding 1.8 mm, impregnated with one or more binders, containing less than 30 % of glass by weight, not coated or covered

  • HS 5603142000

    Carrier sheet, of polyester, specified in additional note 1 to this chapter

  • HS 5603148070

    Non-woven needle-punched sheets of polyester filaments, of a thickness exceeding 0.5 mm but not exceeding 1.8 mm, impregnated with one or more binders, containing less than 30 % of glass by weight, not coated or covered

  • HS 6907210000

    Of a water absorption coefficient by weight not exceeding 0,5 %

  • HS 6907220000

    Of a water absorption coefficient by weight exceeding 0,5 % but not exceeding 10 %

  • HS 6907230000

    Of a water absorption coefficient by weight exceeding 10 %

  • HS 6907300000

    Mosaic cubes and the like, other than those of subheading 6907 40

  • HS 6907400000

    Finishing ceramics

  • HS 6912002111

    Tableware and kitchenware, excluding condiment or spice mills and their ceramic grinding parts, coffee mills, knife sharpeners, sharpeners, kitchen tools to be used for cutting, grinding, grating, slicing, scraping and peeling, cordierite ceramic pizza-stones of a kind used for baking pizza or bread

  • HS 6912002191

    Tableware and kitchenware, excluding condiment or spice mills and their ceramic grinding parts, coffee mills, knife sharpeners, sharpeners, kitchen tools to be used for cutting, grinding, grating, slicing, scraping and peeling, cordierite ceramic pizza-stones of a kind used for baking pizza or bread

  • HS 6912002310

    Tableware and kitchenware, excluding condiment or spice mills and their ceramic grinding parts, coffee mills, knife sharpeners, sharpeners, kitchen tools to be used for cutting, grinding, grating, slicing, scraping and peeling, cordierite ceramic pizza-stones of a kind used for baking pizza or bread

  • HS 6912002510

    Tableware and kitchenware, excluding condiment or spice mills and their ceramic grinding parts, coffee mills, knife sharpeners, sharpeners, kitchen tools to be used for cutting, grinding, grating, slicing, scraping and peeling, cordierite ceramic pizza-stones of a kind used for baking pizza or bread

  • HS 6912002910

    Tableware and kitchenware, excluding condiment or spice mills and their ceramic grinding parts, coffee mills, knife sharpeners, sharpeners, kitchen tools to be used for cutting, grinding, grating, slicing, scraping and peeling, cordierite ceramic pizza-stones of a kind used for baking pizza or bread

  • HS 7009100000

    Rear-view mirrors for vehicles

  • HS 7009100060

    Electrochromic self-dimming inside rear-view mirror: -with a mirror support -in a plastic casing and -with an integrated circuit, -whether or not with a high beam assistant, -whether or not with a digital compass, -whether or not with a garage door opener, -whether or not with an integrated toll module, -whether or not with a camera for driver and/or cabin monitoring, -whether or not with an infrared filter, for use in the manufacture of motor vehicles of Chapter 87

  • HS 7019110000

    Chopped strands, of a length of not more than 50 mm

  • HS 7019140010

    Of low moisture absorption capacity, intended for certain types of aircraft

  • HS 7019150010

    Of low moisture absorption capacity, intended for certain types of aircraft

  • HS 7201000000

    Pig iron and spiegeleisen in pigs, blocks or other primary forms

  • HS 7201100000

    Non-alloy pig iron containing by weight 0,5 % or less of phosphorus

  • HS 7201101110

    Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm

  • HS 7201101900

    Containing by weight more than 1 % of silicon

  • HS 7201103010

    Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm, containing by weight not more than 1 % of silicon

  • HS 7201109000

    Containing by weight less than 0,1 % of manganese

  • HS 7201200000

    Non-alloy pig iron containing by weight more than 0,5 % of phosphorus

  • HS 7201500000

    Alloy pig iron; spiegeleisen

  • HS 7201501000

    Alloy pig iron containing by weight not less than 0,3 % but not more than 1 % of titanium and not less than 0,5 % but not more than 1 % of vanadium

  • HS 7202110000

    Containing by weight more than 2 % of carbon

  • HS 7202112000

    With a granulometry not exceeding 5 mm and a manganese content by weight exceeding 65 %

  • HS 7202210000

    Containing by weight more than 55 % of silicon

  • HS 7202291000

    Containing by weight 4 % or more but not more than 10 % of magnesium

  • HS 7202410000

    Containing by weight more than 4 % of carbon

  • HS 7202411000

    Containing by weight more than 4 % but not more than 6 % of carbon

  • HS 7202419000

    Containing by weight more than 6 % of carbon

  • HS 7202491020

    Containing by weight more than 30 % but not more than 90 % of chromium (super-refined ferrochromium)

  • HS 7202495011

    Containing by weight not more than 0,1 % of carbon and more than 30 % but not more than 90 % of chromium (super-refined ferrochromium)

  • HS 7202499000

    Containing by weight more than 0,5 % but not more than 4 % of carbon

  • HS 7202600000

    Ferro-nickel

  • HS 7202998030

    Calcium-silicon - an alloy that contains by weight 16 % or more of calcium, 45 % or more of silicon, not less than 4 % but less than 14 % of iron and not more than 10 % of any other element; whether or not presented in bulk, packaged in bags or in steel drums, enclosed in steel sheets (or cored wire), or otherwise presented

  • HS 7203000000

    Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94 %, in lumps, pellets or similar forms

  • HS 7203100000

    Ferrous products obtained by direct reduction of iron ore

  • HS 7205000000

    Granules and powders, of pig iron, spiegeleisen, iron or steel

  • HS 7205210000

    Of alloy steel

  • HS 7206000000

    Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 7203)

  • HS 7207000000

    Semi-finished products of iron or non-alloy steel

  • HS 7207110000

    Of rectangular (including square) cross-section, the width measuring less than twice the thickness

  • HS 7207111100

    Of free-cutting steel

  • HS 7207111400

    Of a thickness not exceeding 130 mm

  • HS 7207111600

    Of a thickness exceeding 130 mm

  • HS 7207120000

    Other, of rectangular (other than square) cross-section

  • HS 7207121000

    Rolled or obtained by continuous casting

  • HS 7207191200

    Rolled or obtained by continuous casting

  • HS 7207200000

    Containing by weight 0,25 % or more of carbon

  • HS 7207201100

    Of free-cutting steel

  • HS 7207201500

    0,25 % or more but less than 0,6 % of carbon

  • HS 7207201700

    0,6 % or more of carbon

  • HS 7207203200

    Rolled or obtained by continuous casting

  • HS 7207205200

    Rolled or obtained by continuous casting

  • HS 7208000000

    Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated

  • HS 7208100000

    In coils, not further worked than hot-rolled, with patterns in relief

  • HS 7208250000

    Of a thickness of 4,75 mm or more

  • HS 7208260000

    Of a thickness of 3 mm or more but less than 4,75 mm

  • HS 7208270000

    Of a thickness of less than 3 mm

  • HS 7208360000

    Of a thickness exceeding 10 mm

  • HS 7208400000

    Not in coils, not further worked than hot-rolled, with patterns in relief

  • HS 7208510000

    Of a thickness exceeding 10 mm

  • HS 7208512010

    Of non-alloy steel, excluding tool steel

  • HS 7208519110

    Of non-alloy steel, excluding tool steel

  • HS 7208519810

    Of non-alloy steel, excluding tool steel

  • HS 7208520000

    Of a thickness of 4,75 mm or more but not exceeding 10 mm

  • HS 7208521000

    Rolled on four faces or in a closed box pass, of a width not exceeding 1 250 mm

  • HS 7208529110

    Of non-alloy steel, excluding tool steel

  • HS 7208529900

    Less than 2 050 mm

  • HS 7208530000

    Of a thickness of 3 mm or more but less than 4,75 mm

  • HS 7208531000

    Rolled on four faces or in a closed box pass, of a width not exceeding 1 250 mm and of a thickness of 4 mm or more

  • HS 7208540000

    Of a thickness of less than 3 mm

  • HS 7208902010

    Of non-alloy steel, excluding tool steel, of a thickness exceeding 10 mm or of a thickness of 4,75 mm or more but not exceeding 10 mm and of a width of 2 050 mm or more

  • HS 7208908010

    Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)

  • HS 7208908020

    Of non-alloy steel, excluding tool steel, of a thickness exceeding 10 mm or of a thickness of 4,75 mm or more but not exceeding 10 mm and of a width of 2 050 mm or more

  • HS 7209000000

    Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated

  • HS 7209160000

    Of a thickness exceeding 1 mm but less than 3 mm

  • HS 7209161000

    'Electrical'

  • HS 7209170000

    Of a thickness of 0,5 mm or more but not exceeding 1 mm

  • HS 7209171000

    'Electrical'

  • HS 7209180000

    Of a thickness of less than 0,5 mm