4802551510—Decor paper with the following characteristics - having an ash content between 5% and 50%; - having a Klemm absorbency of at least 12 millimetres per 10 minutes or a resin pick-up of 20% to 200%; - having a wet tensile strength of 6 to 12 Newton (N) per 15 millimetres; - having a Gurley porosity of 3 to 80 seconds per 100 millilitres; - having a smoothness of 20 to 300 according to the Bekk method; - in reels with a width up to 300 centimetres; - whether or not pre-impregnated with a combination of latices or natural binders (like starch); - excluding wallpaper and similar wallcoverings; - excluding papers saturated with water-based melamine, urea, phenol or any thermosetting, thermoplastic resin solutions (‘the product under investigation’).
HS 4802551510 covers decor paper with the following characteristics - having an ash content between 5% and 50%; - having a Klemm absorbency of at least 12 millimetres per 10 minutes or a resin pick-up of 20% to 200%; - having a wet tensile strength of 6 to 12 Newton (N) per 15 millimetres; - having a Gurley porosity of 3 to 80 seconds per 100 millilitres; - having a smoothness of 20 to 300 according to the Bekk method; - in reels with a width up to 300 centimetres; - whether or not pre-impregnated with a combination of latices or natural binders (like starch); - excluding wallpaper and similar wallcoverings; - excluding papers saturated with water-based melamine, urea, phenol or any thermosetting, thermoplastic resin solutions (‘the product under investigation’).. As of the 24 Apr 2026 EU sanctions snapshot, 2 measures apply covering import from Belarus and import from Russia under EU regulation 765/2006 and 833/2014 (Annexes XXVII, XXI). The EU third-country duty rate is 0.0% — this is the rate for all third countries unless a preference applies. EU anti-dumping or countervailing duties apply from China (rates in the range 34.9% and 26.9%) — the actual rate depends on the specific exporter. A ship / do-not-ship verdict depends on the specific route, counterparties, and end use — this page shows the restrictions attached to the code itself.
Facts on this code
- Anti-dumping
- EU duties apply — see tariff layer below for range and exporter note
Tariff layer
EU customs duties and tariff measures on HS 4802551510. Rates are shown verbatim as returned by TARIC.
Rate for all third countries unless a preference applies.
Preferences (2)
| Area | Measure | Rate |
|---|---|---|
| United Kingdom | Tariff preference | 0.0% |
| United States | Tariff preference | 0.0% |
Anti-dumping / countervailing (2)
- China34.9%Provisional anti-dumping duty
The rate depends on the specific exporter — 6 exporters carry different rates under this measure.
- China26.9%Definitive anti-dumping duty
The rate depends on the specific exporter — 6 exporters carry different rates under this measure.
Documents required (17)
- C631—Formal letter validating the use of non-wooden or recycled materials for paper products, issued by the Ministry of Industry of the FLEGT VPA partner country from which the paper products are originating
- C690—FLEGT import licence for timber
- D008—Invoice with a signed declaration
- L142—Import authorisation by virtue of article 3i paragraph 3c of Council Regulation (EU) 833/2014
- L143—Import authorisation by virtue of article 12b.2 of Council Regulation (EU) 833/2014
- L152—Import authorisation by virtue of article 1ra paragraph 10 of Council Regulation (EU) 765/2006
- N864—Preference certificate of origin (declaration of preferential origin on the invoice; EUR.2)
- N954—Movement certificate EUR.1
- U190—Proof of origin established in accordance with Article 6 of Regulation (EU) 2026/1455
- Y057—Goods not requiring the presentation of a FLEGT import licence for timber
- Y727—The prohibitions defined in article 1ra paragraph 1 of Council Regulation (EU) No 765/2006 do not apply (see exemptions in article 1ra paragraph 3)
- Y728—The prohibitions defined in article 1ra paragraph 1 of Council Regulation (EU) No 765/2006 do not apply (see exemptions in article 1ra paragraph 4)
- Y859—Goods entered the territory of the customs union of the EU and presented to customs authorities prior to the entry into force or to applicability date of the present sanction, whichever is latest (see Article 12e of Regulation (EU) No 833/2014)
- Y870—Goods entered the territory of the customs union of the EU and presented to customs authorities prior to the entry into force or to applicability date of the present sanction, whichever is latest (see Article 8f of Regulation (EU) No 765/2006)
- Y874—The prohibitions defined in article 3i.1 of Council Regulation (EU) No 833/2014 do not apply (see exemptions in article 3i.3aa)
- Y984—Goods not originating from or not destined for the non-government controlled areas of Ukraine in the oblasts of Donetsk, Kherson, Luhansk and Zaporizhzhia
- Y997—Goods not originating from or destined to Crimea or Sevastopol (Articles 2 and 2b.1 of Council Regulation (EU) No 692/2014)
Measures on this code
Each row is a distinct measure attached to HS 4802551510 in the consolidated EU sanctions text.
| Type | Regime | Annex | Direction | Source |
|---|---|---|---|---|
Prohibition | EU 765/2006 | XXVII | Import ← BY | EU 765/2006 cons. 20260424, Annex XXVII Prohibited under EU sanctions. This restriction attaches to the code — screen with a route to see whether it applies to your shipment. |
Prohibition | EU 833/2014 | XXI | Import ← RU | EU 833/2014 cons. 20260424, Annex XXI Prohibited under EU sanctions. This restriction attaches to the code — screen with a route to see whether it applies to your shipment. |
Check this code with your route
A ship / do-not-ship verdict depends on origin, destination, transit, counterparties, and end use. Run this code against your actual route in CargoScreen.
Related codes in the same heading
Other TARIC codes sharing the 4-digit HS heading.
- HS 4802540010
Decor paper with the following characteristics - weighing 30 g/m² or more; having an ash content between 5% and 50%; - having a Klemm absorbency of at least 12 millimetres per 10 minutes or a resin pick-up of 20% to 200%; - having a wet tensile strength of 6 to 12 Newton (N) per 15 millimetres; - having a Gurley porosity of 3 to 80 seconds per 100 millilitres; - having a smoothness of 20 to 300 according to the Bekk method; - in reels with a width up to 300 centimetres; - whether or not pre-impregnated with a combination of latices or natural binders (like starch); - excluding wallpaper and similar wallcoverings; - excluding papers saturated with water-based melamine, urea, phenol or any thermosetting, thermoplastic resin solutions (‘the product under investigation’).
- HS 4802552510
Decor paper with the following characteristics - having an ash content between 5% and 50%; - having a Klemm absorbency of at least 12 millimetres per 10 minutes or a resin pick-up of 20% to 200%; - having a wet tensile strength of 6 to 12 Newton (N) per 15 millimetres; - having a Gurley porosity of 3 to 80 seconds per 100 millilitres; - having a smoothness of 20 to 300 according to the Bekk method; - in reels with a width up to 300 centimetres; - whether or not pre-impregnated with a combination of latices or natural binders (like starch); - excluding wallpaper and similar wallcoverings; - excluding papers saturated with water-based melamine, urea, phenol or any thermosetting, thermoplastic resin solutions (‘the product under investigation’).
- HS 4802553010
Decor paper with the following characteristics - having an ash content between 5% and 50%; - having a Klemm absorbency of at least 12 millimetres per 10 minutes or a resin pick-up of 20% to 200%; - having a wet tensile strength of 6 to 12 Newton (N) per 15 millimetres; - having a Gurley porosity of 3 to 80 seconds per 100 millilitres; - having a smoothness of 20 to 300 according to the Bekk method; - in reels with a width up to 300 centimetres; - whether or not pre-impregnated with a combination of latices or natural binders (like starch); - excluding wallpaper and similar wallcoverings; - excluding papers saturated with water-based melamine, urea, phenol or any thermosetting, thermoplastic resin solutions (‘the product under investigation’).
- HS 4802559010
Decor paper with the following characteristics - having an ash content between 5% and 50%; - having a Klemm absorbency of at least 12 millimetres per 10 minutes or a resin pick-up of 20% to 200%; - having a wet tensile strength of 6 to 12 Newton (N) per 15 millimetres; - having a Gurley porosity of 3 to 80 seconds per 100 millilitres; - having a smoothness of 20 to 300 according to the Bekk method; - in reels with a width up to 300 centimetres; - whether or not pre-impregnated with a combination of latices or natural binders (like starch); - excluding wallpaper and similar wallcoverings; - excluding papers saturated with water-based melamine, urea, phenol or any thermosetting, thermoplastic resin solutions (‘the product under investigation’).
CargoScreen is an informational tool. Its output does not constitute legal advice and does not replace consultation with a qualified customs or sanctions professional. Verdicts reflect the data available in CargoScreen on the date of the check.